Slowly chipping away at the long list of parts to be fitted to the bike; today was the indicators. As the headlight bracket is angled in, I had to build spacers to offset the indicators so they sat out straight. Armed with a bit of 24 mm rod, 8 mm drill bit and an angle grinder I soon whipped these up.
Installation was pretty straight forward with these spacers made up. Here is the final product.
I mentioned it in a previous post, but dam, I think these indicators are cool! Mounting on the rear indicators will require small lugs welded to the frame. Hope to get around to the rear set next week.
Comments
Post a Comment